swing it motor and box.

drain water out of motor - then move into place where you are going to lift the motor. - otherwise you will be laying in water.

put a dummy yoke in box first, or drain oil first.

you can change motor and box with just the bonnet off if you want, you don't need to remove rad support.

use the bonnet bolts in the heads adjacent to each other with a short chain.

watch that the rear of the 4 sp extension housing doesn't catch and break on the lip on the trans tunnel / firewall - easy to do if your not careful.

have a tyre on the ground ready to land the motor and box onto when it comes out otherwise you will end up with a beat up sump.