Hamish's Hz sandman

[jennie285]

hey mate i dont know if this helps
reg no LO-124
VIN number 939540
ENGINE NUMBER QT 883101DATE OF ACQUISITION 23RD NOVEMBER 1977
JOHN FARR MOTORS
61 WATSON STREET
MOLONG 8866
NSW
one

Molong is a small town about a 40min drive from Parkes where we live, that dealer, I expect it is closed like most small GMH dealers, interesting though

[HK1837]

Cool, i'll add most of that to the database.

[razsandman]

get your self a gregorys/max ellerys manual I prefure the gregorys. the basics of remove + install and tools requred are in there. after you've owned the van for a year or two you'll prob never look at the book again but its worth having one.

[wbute]

If you can put a spanner on a nut without burring it up and can tell if the bolts are imperial and not metric then you can rebuild a Holden commercial vehicle. They are easy if you take your time and get on here and ask a question if you have any dramas. Use the book like razsandman says. Problems with heater controlls are probably the hardest to work on to start with as it usually means a bit of dash disasembly. Just remember that if this farmer can do it so can you.

[HAMISH2]

cheers guys think il give it ago and if i get stuck il post on here
plus i got a few mates that have worked on old holdens before so will see how things go
just awaiting on a few parts atm
anyways more pics
heres a few more interior pics



few progress pics,off with the old exhaust ,on with the new,was 1 of the first things i got done




and made a small vid (this was after the new heads were put on)
http://s171.photobucket.com/albums/u...t=100_0486.mp4
more progress pics to come

[agr071]

sweeeeeeeeeeeeeeeeeeeeet!!!!!

[HZSandman]

can't go past the crushed velvet.