Results 1 to 10 of 23

Thread: My HX Sandman P/Van

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    It's a rockin' adam perth's Avatar
    Join Date
    Feb 2010
    Posts
    1,222
    Quote Originally Posted by hj308 View Post
    Do you mind sharing how or what you had to do to restore the fasica back to silver, I have read comments I think on this site where it is claimed that all HJ's Sandmans came out with silver fascia's but reading on another site this week one guy claimed to own to original HJ Sandmans and stated both had black fascias so I am a little confused, were they both an option?? Out of curiosity as I am undecided on this issue myself will you be painting it in 2pak or acrylic?
    Its not really clear.
    i have researched this topic a little bit, so far i have come up with:

    it appears early HJ's had silver fascia standard.
    mid - later HJ's had black fascia standard with silver option

  2. #2
    Super Moderator Absinth's Avatar
    Join Date
    Feb 2010
    Location
    Junee, NSW
    Posts
    1,937
    The early HJ parts catalogue list two GTS fascia's. manual and console shift.... column shift... both are silver. The later HJ parts catalogue lists black, woodgrain and silver GTS fascia's but the silver one is listed as Monaro only..... no mention of Sandman whatsoever.

    The HX parts catalogue lists the silver GTS dash as Sandman and Monaro only.

    When the change occured and if it did actually occur is unknown.

    To restore my fascia the first thing I did was take it down to the paint shop and had the silver matched in acrylic lacquer. I plastic welded the cracks and repaired the radio cut out using an undamaged kingswood fascia. Masked it up and re-painted it silver.

    I am going to do another one shortly and will post a how to with pics when I do. It's not that easy and you need a good plastic welder... I paid $600 for my welder but I have seen similar on Ebay for around $200... don't know how good they are though.

    If you are just going to restore the one fascia you might be better off sending it to Dash Revival, Dash Original or The Dashboard Doctor. I know Patrick at Dash Revival charges around $300 to repair and re-paint them depending on where and how much they are damaged.
    4/75 HJ XX7 Sandman Panelvan ... Persian Sand currently restoring
    7/76 HX Monaro 4dr 308 4sp... Absinth Yellow and rusty as hell.. SOLD
    3/77 HX Sandman Panelvan ... Absinth Yellow and rusty as hell .. SOLD

    http://www.44gpw.info/sandman-decalssmall2.jpg

  3. #3
    Cruiser
    Join Date
    Mar 2010
    Posts
    340
    Okay thanks for that , the dash in your photo looks great - well done. In regards to paint I should have explained myself better. When you repaint the van will you be going 2 pak?? Most people seem to go with 2pak better off the gun finish, harder finish etc. My neighbour is old school and is currently restoring 2 genuine Gtr XU1 Toranas, the 1st one which was fully stripped he has painted himself in acrylic and it looks great. The panel beater that came to look at my van says 2 pak is better especially with reds which tend to fade and you need to keep the wax up to them. Personally I think that is one of the joys of having a much loved car in the cleaning and polishing to keep it looking great. My panel beater also claims that 2 paks are now better in regards to being able to do small touch up jobs and not having to do the whole panel again if you get a spot of rust etc. I have noticed with some 2 pak jobs and I am talking new cars of that orange peel look. Is 2 pak the way to go??

  4. #4
    Super Moderator Absinth's Avatar
    Join Date
    Feb 2010
    Location
    Junee, NSW
    Posts
    1,937
    The two dashes in the pic are unrestored, my restored one is wrapped up and put away.

    I haven't quite made up my mind on the paint but will probably go with 2 pak. I have always re-painted cars with acrylic lacquer previously but today's acrylics just aren't what they used to be.

    While I've never actually painted a car in 2 pak I have built and painted a kitchen and several items of furniture in 2 pak so am quite confident I can do a good job on the van. Todays 2 paks are far better than they were years ago and can be easily wet sanded and buffed once dry to get rid of any orange peel if you do get it.

    As with any re-paint.... preparation is the key to success, the more time you spend on preparation the better the finish will be.



    I have also played around with Auto Air water based automotive paint which I find excellent to use but you can't buy it in vehicle manufacturer colours...... it is excellent for custom paint jobs and airbrushing though. Below is a hard hat I played around with using Auto Air paint.

    I need a bit more practice on my freehand airbrushing skills though...:errf:



    4/75 HJ XX7 Sandman Panelvan ... Persian Sand currently restoring
    7/76 HX Monaro 4dr 308 4sp... Absinth Yellow and rusty as hell.. SOLD
    3/77 HX Sandman Panelvan ... Absinth Yellow and rusty as hell .. SOLD

    http://www.44gpw.info/sandman-decalssmall2.jpg

  5. #5
    Cruiser Rolla's Avatar
    Join Date
    Mar 2010
    Location
    South Australia
    Posts
    365
    [/QUOTE]

    If that came on a climbing helmet i'd be buying that! xD

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •