GTS Dash Id needed

**Absinth** · 29-01-2011, 01:34 AM

Originally Posted by HZSandman

Now I need to decide whether to stick it in the van or not. The one in there is genuine with the pins in the RTS badge but I have had to add a black facia plate around the radio as the wholes have been flooged out a bit. But I like the gloss black finish on my one better than the more mat finish on this later type. Decisions, decisions.

Ian, Buy some Novus plastic polish and just polish the new one up to the way you like it. I use this stuff all the time and it's great for lenses, reflectors etc as well. It comes in 3 bottles... heavy scratch, fine scratch and polish.
Ebay link to the small set....
http://cgi.ebay.com.au/Novus-Plastic...item2560bfb3a0

Jason, it's a HZ fascia so I don't need it..... I want a HX one but do have two I have repaired. I just like to buy them if the price is right to restore. I just need to find a guy down here in Melbourne now who is good at re-chroming plastic.....

I am starting to buy consoles now also to restore... picked up a HJ Sandman one the other day that is a good resto candidate... I also repaired a set of seat plastics (hinge covers) recently that came out really good but it is hard to find enough donor ones to repair the good ones.

**HZSandman** · 31-01-2011, 07:20 PM

Will the plastic polish bring out a decent shine Sean?

**Absinth** · 01-02-2011, 01:52 AM

It will polish the fascia up to a mirror finish if that's what you want Ian. I use it to polish up original gauge lenses to as new condition. The (No.3)heavy and (No.2)fine scratch remover are both creams and the (No.1) is a spray on wipe off clean and shine.

On that fascia I would use the fine scratch remover until you get the desired shine and then spray the cleaner. It is fantastic stuff, not overly cheap but you don't need much as a little goes a long way. I guarantee you won't be dissappointed with it if used properly.

This stuff is to plastic what Autosol is to mag wheels.....