New NSW rego rules coming

**GTS** · 11-02-2011, 09:52 AM

Have a read....I believe that NSW RTA is pushing to have these new rules in place before the March election.

http://www.rta.nsw.gov.au/registrati...mment_dl1.html

**HK1837** · 11-02-2011, 10:35 AM

Doesn't look too bad, at least it isn't stupid like QLD where you have to get a plate if you add factory buckets or the like. The biggest issue will be the addition of a modification plate. Big ask for a show or similar vehicle.

**GTS** · 11-02-2011, 10:40 AM

It also means no injected motors in an early model car.

**wbute** · 11-02-2011, 10:56 AM

The way I read it (and i am no doubt wrong) is that modifications not on the exemp list will need to engineered? So something like a fuel injected motor out of a vs into a hz would need a engineers certificate?
More rules and regs we dont need I imagine.

**HK1837** · 11-02-2011, 11:02 AM

Where does it say that GTS? In NSW we have always needed an Engineer's Report for say a VN engine into a HQ. You have always been able to put an injected top end on a HT-HJ block and put into HT-HJ but never been able to do this for HX-WB. As far as I can tell this won't change. We will be able to fit bigger engines under the national rules, but we won't be able to fit 8" rims to HQ-WB anymore. The biggest allowable will be 7" (well 7" plus 15mm) without an Engineer's Report.

**wbute** · 11-02-2011, 01:05 PM

It says the engine has to have been an option for that particular car.

http://www.rta.nsw.gov.au/registrati...ifications.pdf

**HK1837** · 11-02-2011, 01:19 PM

That is for modifications exempted from Engineer's Certificate.

**wbute** · 11-02-2011, 02:12 PM

Yeah and it list standard motors available by the manufacturer as one of the exemptions. So a fuel injected motor would not fall in this exemption meaning it would need a certificate. As for where it says you cant put them in an older model at all I have not found.