Originally Posted by wbute
so nice and green....all the time
HZ Jasmine Yellow Windowless Sandman, now being driven everywhere and is finished!
HZ Madeira Red Windowless sandman now Sold to Bigrob
HX Mandarin Red Sandman Ute finished, and club registered
1979 HZ malachite windowless van with 308 5spd, all chromed up and shiny finished and named "The Player"
Married to RodneyHZ253
Wow I wish I had room to build something like that it looks great.....
HZ Jasmine Yellow Windowless Sandman, now being driven everywhere and is finished!
HZ Madeira Red Windowless sandman now Sold to Bigrob
HX Mandarin Red Sandman Ute finished, and club registered
1979 HZ malachite windowless van with 308 5spd, all chromed up and shiny finished and named "The Player"
Married to RodneyHZ253
gaddy..do yourself a favour now and loose the diffuser panels in the roof....i had some in my garage and the uv light that was let in actually started to fade posters etc...it also made the shed way to hot in summer..good idea at the time but i got rid of mine after about 4 years.a dark garage is better for the cars paintwork and a cool garage is better for the cars rubbers..
In my workshop as well but had to paint them to block out some of the light. Now they are going brittle from the sun and the next hailstorm will go straight through them. A sheet of iron will replace them as well.
Same put them on a shed I build once worst thing I could have done they just increase the heat and discomfort if you happen to be working below them.
Duly noted gents thanks. They are on the eastern side so Im just experimenting with them for now. The whole roof is insulated under the tin so Ill see what happens nexrt summer..
2 Sheets of tin are cheap indeed!!
On another note!!
Its Finished!!!
By gaddy69 at 2011-03-09
By gaddy69 at 2011-03-09
By gaddy69 at 2011-03-09
By gaddy69 at 2011-03-09
With the Shed finishednow, all I need to do is get the power and lights done, (fridays plan) hook up the down pipes to the tank and stormwater,( tank is still a week away)
and then seal the floor inside with either a paint product or a clear sealer coat!!
Was told that as the inside floor is a smooth finish, just sealing it with clear will make it very slippery when wet!!
Any suggestions about a suitable product to use from anyone here would be great..
Even if you can tell me what NOT to use would be a help..
Cheers..
Happy Gaddy!!
i used a paving paint with a non slip boating type product put into the mix at the time of painting..its still slippery in thongs when wet but not to bad..do not paint the floor for at least 3 months after being laid as all the chemicals are still rising out and the paint will start lifting after a couple of years because of this...i know..
Gaddy,
If I was you I would go and see a decorative concrete supplies place. (South Coast Decorative Concrete Supplies are down your way) There are sealers that can be applied in around 28 days. You could also get it in colour. A light colour would be good to bounce light around, especially if you get rid of the skylights. They will also give you the run down on the non slip additives available. I think, stay away from the ground glass option as I think this will wear off with trolley jacks etc because it sits on top. There is one that you mix into the drum and its like a silicone powder. It looks like it would do nothing but it does.
I really wish I had of done this with my shed before I spilled oil and crap everywhere.
PS Shed is looking great!
Chris
haha if you dont want the houses to go up. go put some chemicals in the soil so they cant build there hahaha... contaminated soil is always a good way to stop construction hahaha
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks