Page 10 of 15 FirstFirst ... 89101112 ... LastLast
Results 91 to 100 of 148

Thread: WTB: HZ Panelvan

  1. #91
    Leadfoot NickyG's Avatar
    Join Date
    Nov 2010
    Location
    Bittern, Victoria, Australia
    Posts
    178
    good idea about the removal of inside panels.. I might ask him to do that... there was no rust i could see in the gutters but as everyone knows it only comes up once isoda blast it

  2. #92
    It's a rockin' playwme's Avatar
    Join Date
    Apr 2010
    Posts
    1,935
    I'm with Byron on this one. I trip over rust free Holdens down here. I keep buying them thinking "that'll be good for parts". Yet to get one that was bad enough to pull to bits so far.
    If I had any money right now (stay at home dad for a bit) i'd be hooking the car trailer up to the truck and heading up to Batlow for those 2 Windowless vans on ebay.

  3. #93
    Forum Mum jennie285's Avatar
    Join Date
    Apr 2010
    Location
    Parkes Central West NSW
    Posts
    2,464
    Quote Originally Posted by playwme View Post
    If I had any money right now (stay at home dad for a bit) i'd be hooking the car trailer up to the truck and heading up to Batlow for those 2 Windowless vans on ebay.
    HZ Jasmine Yellow Windowless Sandman, now being driven everywhere and is finished!
    HZ Madeira Red Windowless sandman now Sold to Bigrob
    HX Mandarin Red Sandman Ute finished, and club registered
    1979 HZ malachite windowless van with 308 5spd, all chromed up and shiny finished and named "The Player"
    Married to RodneyHZ253

  4. #94
    Cruiser
    Join Date
    Apr 2010
    Location
    Southern Highlands NSW
    Posts
    342
    If I had any money right now (stay at home dad for a bit) i'd be hooking the car trailer up to the truck and heading up to Batlow for those 2 Windowless vans on ebay.[/QUOTE]

    I had a look at the HJ a couple of months ago when he wanted 1500, you can see the ground through the rear inspection panel down to the guard, it has torana buckets and a new speedo cable. The other van was in his shed but didn't look at it cause he said it was his project car, looked alright from a distance

  5. #95
    Leadfoot NickyG's Avatar
    Join Date
    Nov 2010
    Location
    Bittern, Victoria, Australia
    Posts
    178
    That Hz does look like a treat... I'm gonna talk to the uncle on his thoughts about the one in NSW as well as the one we have already seen. His the boilermaker who also works as a mechanic/ beater.. But we have to fix the EF first :( going to the dandy wreckers to get a motor for it

  6. #96
    Night Rider Vombil's Avatar
    Join Date
    Feb 2011
    Location
    Western Suburbs
    Posts
    2,630
    Quote Originally Posted by playwme View Post
    I'm with Byron on this one. I trip over rust free Holdens down here. I keep buying them thinking "that'll be good for parts". Yet to get one that was bad enough to pull to bits so far.
    If I had any money right now (stay at home dad for a bit) i'd be hooking the car trailer up to the truck and heading up to Batlow for those 2 Windowless vans on ebay.
    good call. the seller is a funny bugger too

  7. #97
    Leadfoot NickyG's Avatar
    Join Date
    Nov 2010
    Location
    Bittern, Victoria, Australia
    Posts
    178


    ill contact him during the week to see if he can get to the back of the panel for me but thats what it looks like along it
    Last edited by NickyG; 29-03-2011 at 02:02 PM.

  8. #98
    Leadfoot NickyG's Avatar
    Join Date
    Nov 2010
    Location
    Bittern, Victoria, Australia
    Posts
    178
    found this old girl today while bored at uni..

    http://vic.gumtree.com.au/c-Cars-Veh...dIdZ270376581#

  9. #99
    Sandman Guru
    Join Date
    Jul 2010
    Posts
    6,451
    This HZ might be OK too. 6cyl manual. Pretty cheap, looks pretty original. I don't think it is a Kingswood though.

    http://www.carsales.com.au/all-cars/...e=15&__Dx=mode matchany&__No=90&__D=hz&silo=1011&seot=1&__sid=12D FEF78DD5B&__N=1216 1246 1247 1252 1282 4294965857&__Ns=pCar_RankSort_Int32|1||pCar_PriceS ort_Decimal|1||pCar_Make_String|0||pCar_Model_Stri ng|0&__Ntx=mode matchallpartial&Cr=7&__Ntt=hz&trecs=99&__Qpb=true

  10. #100
    Leadfoot NickyG's Avatar
    Join Date
    Nov 2010
    Location
    Bittern, Victoria, Australia
    Posts
    178
    Quote Originally Posted by HK1837 View Post
    This HZ might be OK too. 6cyl manual. Pretty cheap, looks pretty original. I don't think it is a Kingswood though.

    http://www.carsales.com.au/all-cars/...e=15&__Dx=mode matchany&__No=90&__D=hz&silo=1011&seot=1&__sid=12D FEF78DD5B&__N=1216 1246 1247 1252 1282 4294965857&__Ns=pCar_RankSort_Int32|1||pCar_PriceS ort_Decimal|1||pCar_Make_String|0||pCar_Model_Stri ng|0&__Ntx=mode matchallpartial&Cr=7&__Ntt=hz&trecs=99&__Qpb=true
    that onces been there for a while... i contacted the bloke but never got a reply

Thread Information

Users Browsing this Thread

There are currently 7 users browsing this thread. (0 members and 7 guests)

Similar Threads

  1. 308 into my WB Panelvan
    By toshy in forum Engine
    Replies: 15
    Last Post: 26-04-2012, 09:02 PM
  2. HZ Panelvan help
    By Whitesack07 in forum HELP... Is This a Sandman?
    Replies: 6
    Last Post: 24-03-2012, 02:14 PM
  3. My new toy - HQ Panelvan
    By HQGTSbrad in forum Replica Sandmans
    Replies: 63
    Last Post: 11-03-2012, 02:28 PM
  4. HQ panelvan
    By thatotherguy in forum Archive
    Replies: 12
    Last Post: 11-02-2012, 08:54 PM
  5. HZ Panelvan Add
    By mauser in forum The Lounge
    Replies: 2
    Last Post: 02-11-2011, 08:34 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •