HQ Chromed Upper Doors

[wbute]

http://cgi.ebay.com.au/HOLDEN-ONE-TO...item3cb601ce9b

There was a bloke selling new ones for less than that!

The Kingswood vertical ones go for 100 plus if they come up. The stato trim is every where.

[SandmanMuscle]

http://cgi.ebay.com.au/ws/eBayISAPI....tchlink:top:en

This is them yes?

[HK1837]

Nope.
Have a close look at this ute. See the vertical stainless just behind the door frame. It goes in that little recess behing the door.

http://cgi.ebay.com.au/1978-Holden-H...item27b9456b28

[wbute]

Watch out for dodgy brothers home made/modified ones.

[ozbox]

good undamaged verticals are worth $250.plus...ive been getting that price for the last 10 years..with marks in them $100 for the pair..
statesman hq to hz front door moulds undamaged are worth $350 for the pair of doors.with marks in them 100 to 150 for the doors..
wb statesman door moulds are worth $110 for the pair of doors..
use car gutter moulds and cut them down..generally $90 for a pair..

you want perfect mouldings you will pay because to have them repaired is expensive..

[HK1837]

Lucky I collected heaps over the years when they were $5 each! I used to pull them (gutter plus verticals) off every HQ-WB Kingswood ute I saw at a wreckers, and use them on tonners.

[wbute]

Vertical b pillar strips. Most over priced HQ-WB part there is in my book.
http://cgi.ebay.com.au/HOLDEN-HZ-WB-...item27b985d358