HQ Chromed Upper Doors

**SandmanMuscle** · 16-03-2011, 09:55 PM

http://cgi.ebay.com.au/ws/eBayISAPI....tchlink:top:en

This is them yes?

**HK1837** · 16-03-2011, 10:38 PM

Nope.
Have a close look at this ute. See the vertical stainless just behind the door frame. It goes in that little recess behing the door.

http://cgi.ebay.com.au/1978-Holden-H...item27b9456b28

**wbute** · 17-03-2011, 08:10 AM

Watch out for dodgy brothers home made/modified ones.

**ozbox** · 17-03-2011, 10:47 AM

good undamaged verticals are worth $250.plus...ive been getting that price for the last 10 years..with marks in them $100 for the pair..
statesman hq to hz front door moulds undamaged are worth $350 for the pair of doors.with marks in them 100 to 150 for the doors..
wb statesman door moulds are worth $110 for the pair of doors..
use car gutter moulds and cut them down..generally $90 for a pair..

you want perfect mouldings you will pay because to have them repaired is expensive..

**HK1837** · 17-03-2011, 10:51 AM

Lucky I collected heaps over the years when they were $5 each! I used to pull them (gutter plus verticals) off every HQ-WB Kingswood ute I saw at a wreckers, and use them on tonners.

**wbute** · 17-03-2011, 08:04 PM

Vertical b pillar strips. Most over priced HQ-WB part there is in my book.
http://cgi.ebay.com.au/HOLDEN-HZ-WB-...item27b985d358

**Nigelk777** · 17-03-2011, 09:22 PM

I have a set of Hz or WB (not sure which) stainless door moulds (but not vertical pillar strips) if anyone's interested. They have a black line moulded into them. One of the vertical door strips seems to be nos (still in a sealed plastic bag - but not with GMH markings). If anyone's interested you can PM me. They've been wrapped up for years, but from memory they're unmarked. I don't need them as have a complete set on my doors already (see the madeira HZ ute in the album section). Nige

**ozbox** · 18-03-2011, 10:31 AM

Originally Posted by wbute

Vertical b pillar strips. Most over priced HQ-WB part there is in my book.
http://cgi.ebay.com.au/HOLDEN-HZ-WB-...item27b985d358

its called supply and demand....if you aint got them and i have then the price will be according to market which was originally determined by rarity...these moulds were put on so badly from factory that they would fly off at 100mph..you can take them off cars in parking lots with your bare fingers..no tools needed..

--- Updated ---

Originally Posted by wbute

Vertical b pillar strips. Most over priced HQ-WB part there is in my book.

NO....i just sold a full set of hq hj hx coupe mouldings that were fair to good for 3k...
there is 15 mouldings on an hq hj hx coupe and 13 of them are unique to coupes,2 will interchange from a car/ute/van...this works out to $230.76 each for the 13..this is not how they are sold individually.... the top screen moulds are the rarest to get and also fly off at over 100mph...best ive got for a pair of the is $750.