Repairing GTS clock

[Absinth]

Mate all the clocks I have that still have their knob attached the knob is grey.... all appear to be painted grey as when I scrape them they are black underneath or you can see where the paint has worn off from too much knob handling.....

Twiddle your knob too much and it'll turn black.....or worse still... it may break off from over use...

[wbute]

Thanks Absinth............ My clock is always working so I dont need to fiddle with the knob too often:Chin:

--- Updated ---

Lucky dip I got in the mail today. Got some handy HJ-WB gts clock parts amoungst a heap of interesting screws etc. There appears to be parts of a HQ GTS clock, but never having seen one I am only guessing.

[HJMon]

Hey Wbute,

Just checking if you still have a hold of any of these clock parts? I'm trying to fix my blue needle clock GTS clock, and I'm looking for 1 plastic gear and the resistors you mentioned above. I've stripped my down and tested 12volt to the board and did get a brief hmmm but no movement.

Heres a pic of the gear I'm chasing. It's the 2nd one down with the missing teeth.
Photo 23-8-17, 6 38 54 pm.jpg

Heres the board with it's dodgy capacitor I think.
Photo 23-8-17, 6 39 10 pm.jpg