Page 1 of 3 123 LastLast
Results 1 to 10 of 27

Thread: How much to pay for a VERY rusty HZ?

  1. #1
    Learner Driver
    Join Date
    May 2011
    Posts
    4

    How much to pay for a VERY rusty HZ?

    Hi everyone, I've been lurking around here for a while now and have to say I'm blown away by the passion all you guy's have for your Sandmans (Or anyone else's!)

    So here's the thing: I've found what I'm pretty sure is a genuine HZ Sandman Pano, original 308, auto. Brown interior. Currently white but the original colour is Blue 567-30525.

    The shell is well and truly stuffed, holes thru sides/gutters, there's more gone from the sills than there is left!

    The interior is pretty good though, all original, the whole front is also usable. Original 308 that apparently runs. Original wheels.

    SO: How much would you pay for it? (Assuming it is a Sandy and allowing for another shell) (I will do most of the work myself)

    I'd also welcome advice on the whole Re-shell thing: Will it still be considered a genuine Sandy when done?

  2. #2
    Sandman Driver HZSandman's Avatar
    Join Date
    Feb 2010
    Location
    Melbourne
    Posts
    665
    very nice combo.

    I'll get in early and say it would still be a Sandy with a new shell. Let the fun begin.

    Not to sure on Dollars, would have to see how good everything else is. Add up the $$$ for the parts that are in top nick and then + $500-$100 for the ID Plates in reality.

  3. #3
    Sandman Guru
    Join Date
    Jul 2010
    Posts
    6,451
    Pursits in other areas will argue that it is no longer original. But use the right shell (very important but I'm not going to spell it out) and no-one would know.

  4. #4
    It's a rockin' mauser's Avatar
    Join Date
    Nov 2010
    Location
    Canberra, ACT
    Posts
    1,148
    Hi,

    There are a few threads here discussing this very question....

    I think the general consensus is that re-body is sort of ok if you keep the origional chassis and tags together. This is really a personal thing. I guess in some cases it is required to save another one from the crushers... Just buy a van from about the same time and hopefully plant as yours and you should be sweet.

    Mauser

  5. #5
    Cruiser TwoTees's Avatar
    Join Date
    Nov 2010
    Location
    Canberra
    Posts
    205
    Welcome Johan,
    How much to pay is a very subjective question. You are really only buying the tags hopefully with a matching chassis along with any running gear that may be good and looking for another body. To some that is worth paying good money and there would be others that wouldn't. How bad do you want a Sandman and how much are you prepared to do to save dollars.

    About the re-body thing, have a read of this thread.

    http://www.mysandman.com.au/forums/s...ghlight=rebody

    Again a subjective question.

    Regards, Chris
    Last edited by TwoTees; 04-05-2011 at 08:38 AM. Reason: I stuffed up

  6. #6
    Learner Driver
    Join Date
    May 2011
    Posts
    4
    Thanks guys. I'm sort of with the purists - that's why I asked! But I'm also agreeing that it will save the car - and I get my Sandman! Thanks too for advice on dollars - makes sense.

    --- Updated ---

    Thanks Chris, that link's not right! please re-post it?

  7. #7
    Night Rider Blocker's Avatar
    Join Date
    Feb 2010
    Location
    Behind the keyboard.
    Posts
    3,166
    The body 'per say' is not the Sandman. However the wrong body can be put on a Sandman chassis.
    It's not a matter of trying to hide the fact the build has been re bodied, it is the care taken in making sure that the re body is in keeping with the original build and if asked - be honest.

  8. #8
    Cruiser TwoTees's Avatar
    Join Date
    Nov 2010
    Location
    Canberra
    Posts
    205
    Quote Originally Posted by Johan View Post
    Thanks Chris, that link's not right! please re-post it?
    Oops! Try again

  9. #9
    Well i would say do it, i am currently restoring a genuine hq sandman 6/74 308 4 speed, barbados green and the shell was rusted beyond repair,and i paid $6,200,so you could say i paid for the tags chassis and original running gear,then i bought a one owner hq belmont van for the reshell ,body in resonable shape, inside like new and paid $5,700, and im well into it and loving it, i will do most of the mechanical work myself , but will leave the bodywork and paint to the experts, i will post photos soon, so good luck,

  10. #10
    Night Rider Blocker's Avatar
    Join Date
    Feb 2010
    Location
    Behind the keyboard.
    Posts
    3,166
    Quote Originally Posted by TwoTees View Post
    Oops! Try again
    Maybe this one works

    http://www.mysandman.com.au/forums/s...ghlight=rebody

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. HZ Van Cab chassis Rusty
    By SKI_Pilot in forum My Items For Sale or Buy
    Replies: 12
    Last Post: 16-06-2015, 02:18 AM
  2. Custom diecast rusty sandman.
    By buck in forum The Lounge
    Replies: 2
    Last Post: 20-07-2013, 02:22 PM
  3. rusty roofs
    By thatotherguy in forum Paint & Panel
    Replies: 11
    Last Post: 13-04-2013, 02:56 AM
  4. How rusty is your van compared to this one?
    By HQGTSbrad in forum The Lounge
    Replies: 21
    Last Post: 04-01-2012, 09:26 AM
  5. Rusty drip rails?
    By panelman in forum Paint & Panel
    Replies: 1
    Last Post: 17-09-2011, 11:29 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •