would standard lifters work ok with this cam ?
similar to xu1
Adv duration: 296 degrees
Duration at .050": 227 degrees
Cam lift:.310"
Lobe separation: 112 degrees
:errf:
would standard lifters work ok with this cam ?
similar to xu1
Adv duration: 296 degrees
Duration at .050": 227 degrees
Cam lift:.310"
Lobe separation: 112 degrees
:errf:
the cam card should say on it what it should run. I would say yes to hyd, but only just....You should be replacing lifters with cam anyway....Originally Posted by Herb69
"All correspondence must bear these numbers"
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks