HX Panelvan - is it a Sandman?

[HK1837]

It is a very hard one to pick. I'd say it most likely is, but it still could be an XU4 Holden van. Metallic was available only on Sandman on HX Holden vans and utes, however the only exceptions to this have been Elizabeth builds which is what yours is. Something is wrong with the PSN though as you have it starting with L2 which it cannot for HX. The last L2 PSN's were 2/75 HJ's. Can you PM me the rest of the vehicle's details? I have 1 x other 1918 painted Elizabeth van, it is an 11/76 L31 M21 example. It has 60A trim too.

[Rico]

Sounds like a bit of a mixed bag. If you really love it, then its value is priceless. Glad to hear that you were able to stop it from going to the graveyard. Shame bout the chassis though.

[HK1837]

I wouldn't worry too much about the rails. If it was a Sandman it was a 253 auto HX and thus will never set the world on fire value wise. I'd just build it up to look original externally but do what you want underneath. Being HX you do not suffer from any additional pollution equipment going to HZ rego (which it will be by the rails), and you gain much improved ride and handling with the HZ suspension. It would look fantastic painted in its original colour and trim combo. I'd stick an EFI 304 and 4L60 into it, run 15x7 GTS rims and standard ride height. Will make for a very impressive vehicle with or without stripes. Dont hesitate to fit integrated A/C and power steer either.

[blackvan]

Hi and thanks for all your replies.

To HK1837: I double checked all of the numbers and found I made a typo with the build factory - it should have been L3, so the VIN plate number should have read 8M70RGL3 ...

The ride did improve with the HZ suspension (together with the thousands spent on Pedders components).

Anyway, never mind. The van is so far from an original I guess its a moot point.

Thanks again for your help.

[HQGTSbrad]

should put some pics up mate.