Ute spare wheel winch

[Dylan]

I did think of that, but i did have a mate pulling on the buckle to simulate. Maybe just need to fit it all back up and try.

[wbute]

without having one in my hands cant help you much more sorry. You dont need to push them inwards to lower though, they just go down, like a cheap hooker.

[RodneyHZ253]

When you are winding the winch down I think the inside kind of it turns on a thread and winds back a bit and lessens the pressure on the teeth so they are not as tight but the teeth will still hold or with a little presure will let the tyre down(from menory)

--- Updated ---

You don't need the weight of the wheel

[SHAUN perth.]

When you are winding the winch down I think the inside kind of it turns on a thread and winds back a bit and lessens the pressure on the teeth so they are not as tight but the teeth will still hold or with a little presure will let the tyre down(from menory)

--- Updated ---

You don't need the weight of the wheel

Hi guys check out the spare wheel winch on VZ commodore utes they are the same and can still buy new!

[HK1837]

Hi guys check out the spare wheel winch on VZ commodore utes they are the same and can still buy new!

All VG-VZ should be close. Just the bit that holds the wheel will differ a bit.

[sanman]

Just don't use a Toyota Hilux one.

One day you will loose your spare GTS rim.

Geoff

[ozbox]

All VG-VZ should be close. Just the bit that holds the wheel will differ a bit.

and the bolt up to chassis is different..but close.

[wbute]

http://www.ebay.com.au/itm/170691564...84.m1439.l2649

This is a GTS wheel whinch right? Will be a good spare for my wb if not.