Could this be a sandman - Chassis swap

[ozbox]

http://studentweb.usq.edu.au/home/q1...ines/vsi19.pdf

page 6 states...the compliance plate where fitted will be disregarded if...
the identifying number on the compliance plate does not match the chassis number or vin number....

like i said i do facts...btw..took me 10 minutes to find that little bit of gold....

--- Updated ---

It is now time for him to produce the proof of his claims. Once he has done this I will agree with him

....

[Gaddy]

Do you ever sleep Oz ?
Are you a vampire!

[ozbox]

Do you ever sleep Oz ?
Are you a vampire!

no gadz .... im an old dog with a bone ...[COLOR="Silver"]

its true isnt it...

[Gaddy]

That your a Vampire?

[ozbox]

no..that common sense isnt all that common..

--- Updated ---

There are 3 entities discussed in the legislation .....EDIT well actually more but only 3 relevant to this topic.
A "Component identification number" unique number
A "Vehicle Part" a chassis, engine or body shell
And a "Registrable Vehicle"

The "registrable vehicle" has a "Vehicle part" and a vehicle part has a component identification number.
Quote from the definitions section...
"component identification number, when used in relation to a part of a registrable vehicle, means the number and any accompanying letters or symbols stamped on or otherwise affixed to that part as a means of identifying the part" and also in its own description "Component" identification number not a vehicle identification number.

Jump a few paragraphs down to here...


68 Change or replacement of vehicle part

Any person who changes or replaces a vehicle part of a registrable vehicle must:
(a) notify the Authority of such change or replacement within 14 days of the change or replacement, and
(b) specify the following in the notification:
(i) the date of the change or replacement,
(ii) the registration number, if any, of the vehicle,
(iii) the name and address of each registered operator of the vehicle,
(iv) the make and component identification number of the vehicle part removed from the vehicle,
(v) the make and component identification number of the vehicle part substituted for the original vehicle part,
(vi) the name and address of the person from whom the substituted vehicle part was obtained, and
(c) retain a copy of the notification in the person’s possession for a period of 6 months, and
(d) produce a copy of any such notification for inspection if requested to do so by any police officer or the Authority.
Maximum penalty: 20 penalty units.

The end of the section

So once the chassis has been changed the Authorities require within 14 days, a date, the rego if it is registered, your name, the make of the chassis and number being removed, The make and number of the replacement chassis and the details of where you got it. Keep all this handy for 6 months and show the cops or rego person if asked. Done

No where do they want details of the previous donor registrable vehicle if any. So no identity has been transfered to the recipient registrable vehicle.

More editing....
the make and component identification number of the vehicle part substituted for the original vehicle part,

It clearly states you are substituting a vehicle part Not substituting or putting a new body on a different registerable vehicles chassis

ive proved what i have been typing about..i have no idea what this stuff above has to do with the discussion at hand...im now convinced that you 2t should take over the government and lead our country...

[hqgts]

no gadz .... im an old dog with a bone ...[COLOR="Silver"]

those little blue pills work wonders then :lifesaver:

[hqgts]

http://studentweb.usq.edu.au/home/q1...ines/vsi19.pdf

page 6 states...the compliance plate where fitted will be disregarded if...
the identifying number on the compliance plate does not match the chassis number or vin number....

like i said i do facts...btw..took me 10 minutes to find that little bit of gold....

--- Updated ---

....

C. Vehicles with Compliance Plate discrepancies

A previously registered vehicle (second hand vehicle) where the chassis/VIN number stamped on the
body does not match the chassis/VIN number on the compliance plate, may be registered at any motor
registry where:
• the vehicle is known to have been manufactured in Australia and known to be of a model that
complies with the Australian Design Rules,
• satisfactory evidence is provided as to the previous registration of the vehicle and
• the vehicle is roadworthy (this may require the presentation of an engineers certificate where
the vehicle had been modified).
Note: Where the chassis/VIN number stamped on the body is the same as shown on the vehicles’ registration documents, but is different to the number shown on the compliance plate, the vehicle will be considered as a vehicle without a compliance plate and the owner will be directed by an Authorised Officer of the RTA to stamp a line on the differing number on the compliance plate.

Alternatively, where the chassis/VIN number on the compliance plate is the same as the number
indicated on the vehicle registration documents, but different to the number stamped on the
body, the owner will be advised by an Authorised Officer of the RTA to provide evidences as to
the origin of the number on the body. Where satisfactory evidence has been provided (i.e. sales
receipts, repair invoices, etc.) and the body is found to comply with all the relevant ADR’s
applicable to the vehicle (this requires the presentation of an engineers certificate), the owner
will be directed to stamp a line on the differing number, and the chassis/VIN number (shown on
the compliance plate and registration documents) stamped as close as possible to the location
specified by the vehicle manufacturer.


***So if you have the books does this mean you can restamp the chassis with the original number under the direction of the RTA?***

[Gaddy]

Nice Brad! But why aren't you in bed asleep?

[HQGTSbrad]

Nice Brad! But why aren't you in bed asleep?

What you talking about? i haven't posted in here since Monday night?

[jennie285]

What you talking about? i haven't posted in here since Monday night?

Gaddy thought it was you Brad as it was HQGTS who posted similar username is all....and of course you would have been in bed

cheers J