how do i tell plz help ????

[fordman]

Chassis number and engine number cannot be HQ Sandman but 4/74 certainly could be. Full length headling is not HQ Sandman.

please explan how you know that chssis and motor numbers arnt sandman im having trouble finding info on chassis motor numbers unlike a ford lol

[mauser]

Hi... you can see a hole in the floor for the floor shift. Did you manage to get a look and see if the rear console mount was welded to the floor? Did the column have the shift for the tri/three speed?

Mauser

BTW it might of had a front end smash to have that prem front and might of lost the GTS guards then.

[fordman]

Hi... you can see a hole in the floor for the floor shift. Did you manage to get a look and see if the rear console mount was welded to the floor? Did the column have the shift for the tri/three speed?

Mauser

BTW it might of had a front end smash to have that prem front and might of lost the GTS guards then.

yes hole in floor, yes welded in cosole bracket and all gts gear column plain just indicator stalk dark blue colum dash and seats looks all rigy just raped of all the gts stuff

ahd yes chassis was repaired on left side back in the day hence guards and front and doors

any info on the light blue and dark blue two tone interior

[HK1837]

Sounds like a Sandman shell with rails replaced with earlier ute or van rails as a result of the smash.

HQ lost the vents around 5/74.

I know what the numbers come from by 30 years of ID collecting!

[jennie285]

Pity the RTA don't help anymore as the number plate is still in tact and is the original by the look of it...could I ask where you are Fordman (like your name we have a GT Falcon) I ask this because i have a friend searching for his HQ Chrome yellow Sandman he is from Forbes NSW...

to the forum

[fordman]

Sounds like a Sandman shell with rails replaced with earlier ute or van rails as a result of the smash.

HQ lost the vents around 5/74.

I know what the numbers come from by 30 years of ID collecting!

should i bother geting it ??? i know the front is worth money and body may be a sandy but as it stands without compliance is it worth it

--- Updated ---

Pity the RTA don't help anymore as the number plate is still in tact and is the original by the look of it...could I ask where you are Fordman (like your name we have a GT Falcon) I ask this because i have a friend searching for his HQ Chrome yellow Sandman he is from Forbes NSW...

to the forum

inland west oz wa plates

[jennie285]

Well it won't be his then, as it wouldn't have gone that far away....

[fordman]

Well it won't be his then, as it wouldn't have gone that far away....

yeah shes been there laid to rest since the 80's poor old girl:(

[Absinth]

Sounds like a Sandman shell with rails replaced with earlier ute or van rails as a result of the smash.

HQ lost the vents around 5/74.

I know what the numbers come from by 30 years of ID collecting!

I doubt it has ever been a Sandman. It has no black outs along the the sills and rear beaver and no sign of them ever being blacked out. Weight printed on side is more a commercial thing and unlikely to be found on a Sandman. Been done up at some stage to look like a Sandman.

[GTS]

I doubt it has ever been a Sandman. It has no black outs along the the sills and rear beaver and no sign of them ever being blacked out. Weight printed on side is more a commercial thing and unlikely to be found on a Sandman. Been done up at some stage to look like a Sandman.

Agree...and the "Sandman" sticker on the side is mounted way too high ( according to the instructions I have for mine)....looks like and add on.