Workshop Consumables Costs

[mook]

All Paint (to my knowledge), sandblasting, nuts and bolts, panels, labour has been paid for. Just trying to get a feel for the cost of the workshop sundries so to speak. Cheers though Kruiz for that.

[vanman]

just painting my van now

2k primer cost me $180 you may also need high fill ..
You may need a base coat to give better coverage of the top coat $60-100
sandpaper/discs and wet dry speed-file etc cost me about $80-100
flap discs and strip discs range from $5-$30 each
Prices may be much higher if you go bare metal
gun-wash about $20 4L
apart from paint ..you require thinners and hardener for the 2k top coat..
bog is $40-50 for 4 liters plus you require fine file and maybe spot putty..
masking tape is $7-$20 a roll fine line is super expensive..Used for blackouts etc..
plastic masking sheets add up by the time u finish the job i have spent close to $100 on them
It all adds up
I am doing the lot myself and i have spent around $1000
Lucky i got a mate who is a painter to apply the top coat and help me along the way..