Holden 202 Emissions... Help!!!!

[83 WB_Ute]

Hi guys, I have a blue 202 that has to pass rego... So I think I have all the emissions things that I need, but I would like to verify it and get the length of the rubber hoses... aswell as where they go.

I know it is a big ask, but I want to make it look like it is functioning and then after rego put some ball bearings in the rubber hoses... That way it looks like it is working and therefore will not be as suss as having hoses cut here and there.

Anyway, I have:

1x EGR Valve
1x EFE Valve
1x Thermal Vacuum Switch
1x TCS Solenoid
The EGR and EFE things that mount on the side of the manifold...
Some hoses, But I want to get new ones... So measuerements and directions to where they go would be good...

Let me know if I am missing anything... and if you have pics of a factory setup, please show...

[HX76King]

You should check with a mechanic first an see what a blue slip actually entails, I don't know if there is an emissions test. If you want a concourse look stick with all that stuff if not plug em up. If your not a stupid hoon I doubt that you will get much attention.

[83 WB_Ute]

You should check with a mechanic first an see what a blue slip actually entails, I don't know if there is an emissions test. If you want a concourse look stick with all that stuff if not plug em up. If your not a stupid hoon I doubt that you will get much attention.

I'll just have it there to make it look like it is functioning... just so it isn't suss..

[cheesygrinner]

Does this help? I can email a larger version if you can't read it? PM me if reqd.

emis_202-1.jpg

[83 WB_Ute]

Does this help? I can email a larger version if you can't read it? PM me if reqd.

emis_202-1.jpg

Thanks mate, that is a great help... Where did you get that "W" series parts catalogue??? I may buy one of those if I can find one....

[griffo2]

Never know when someone needs this info...many thx fellas.