Body removal, and chasis restoration.

[HX76King]

Where? You have a a good eye.
I will have to check that out. Will it fit under the roller door??

[V6HQUTE]

Where? You have a a good eye.
I will have to check that out. Will it fit under the roller door??

that street we went out on, theres a bit of a workshop looking yard with a sheds, bit messy, on the same side as your uncle, yeah was only a little forklift, so should fit, ive got my ute on another chassie just to roll it, makes it alot easier, but space might be your issue

--- Updated ---

whats the go with above beatle?? bug??, your going to want more than 4 blokes, id say atleast 6+

[GTS]

I removed the body from my chassis myself and put it back together myself. It's a bit hard to explain on here but it was pretty easy. The preparation took a while but the actual body removal took only about 30-40 minutes to get it off and the same to put it back on. The trick is to make sure you have removed everything like all front panels/motor/box/exhaust/fuel tank/brakes pipes off the master cylinder/steering column/hand brake cable at the handle etc and most importantly (and obviously) the body mounting bolts.

If you want to know how I did it you can call me 0411075521...it's easier to describe it over the phone than write it.