Fixing My Dash Fascia...

[Taily]

Makes my repair look like a walk in the park! I used fibreglassing resin (obviously without the glass) behind and t strengthen my repairs and then a thin scrape of bog as I was only cleaning-up the radio hole and a couple of other holes that were in the fascia. Then masked (that took some time - I found a thin roll of pinstriping worked for me) and painted it.

I dips me lid to those plastic welding theirs back together!

Regards,

Dave

[83 WB_Ute]

Makes my repair look like a walk in the park! I used fibreglassing resin (obviously without the glass) behind and t strengthen my repairs and then a thin scrape of bog as I was only cleaning-up the radio hole and a couple of other holes that were in the fascia. Then masked (that took some time - I found a thin roll of pinstriping worked for me) and painted it.

I dips me lid to those plastic welding theirs back together!

Regards,

Dave

Yeah, it's not the best or easiest to fix... But it was the best one I had.. And I am keen to try and fix anything.. I am always trying to improve the things I have..

I tried making the repair bits as close as I could and then tack them in with a bit of super glue (on the back) and then use putty/bog on the front, but it didn't work really well... lol

Masking is the fun part!!! Only when you know what your doing though.. I don't mind doing it, cause it has to be precise if you want it to look good... And if it isn't good enough, I would redo again..