throttle cable to suit the 304 efi conversion

[jaft]

hi

Can u buy off the shelf the throttle cable to suit HQ WB to the 304 efi throttle body yet.

With the amount of ppl doing the conversion now was hoping it would be just a part off the shelf.

Cheers jaft

[HK1837]

Just us a VN V6 cable and file the hole in the firewall round to suit.

[jaft]

ok

cheers

[James]

I bought an aftermarket one recently, about $75, perect fit.

[jaft]

was that VN V6 too.

[James]

no, asked for cable to suit 304 efi and fit a HZ, as you said earlier it is probably a common conversion

[blownbudget19]

I bought an aftermarket one recently, about $75, perect fit.

do you still have the details of where you got it from? i seen them on ebay a while ago but cant find them now that i need one!

[ozbox]

do you still have the details of where you got it from? i seen them on ebay a while ago but cant find them now that i need one!

i have a couple here new and had to wait for them to be made when i ordered them..they arent 75 bucks unfortunately..they used to be..cost you $110 delivered to wherever you are and i have 2 only..if interested 0249594546 tuesday to saturday..

[KRUPTOR]

When i did the EFI 5L conversion into my fiances hz tonner i just modified the V8 carby cable,i used these cable crimps similar to what they use on hand brake cable on trailers biut much much smaller,this conversion was done close to 4yrs ago and never had any dramas with it.But i had to use the end of the efi cable.

[Taily]

hi

Can u buy off the shelf the throttle cable to suit HQ WB to the 304 efi throttle body yet.

With the amount of ppl doing the conversion now was hoping it would be just a part off the shelf.

Cheers jaft

Shhhh, don't tell anyone I told ya.... Here on eBay...

Just been re-listed, waiting on mine to arrive.

Regards,

Dave