GTS wheel painting

[Shadowmax]

I use masking tape and a hobby knife with plenty of spare sharp blades.

Yep just takes a bit of time ... and you can enjoy the carton of beer bought with the cash saved ;)

[ozbox]

Yep just takes a bit of time ... and you can enjoy the carton of beer bought with the cash saved ;)

depending on your beer of choice its 2 to 4 cartons that you can drink....

[wayne g]

Purchased a set of the mask kit from Ebay a while back.

Worked ok although I still did have to trim up the masks a bit with some trimming tape to hold down edges etc.
The 2pak did not bleed under the masks that I used and probably did make the job a little easier.

[jennie285]

Wondering if anybody has used or bought these.....

http://cgi.ebay.com.au/Masking-Kit-S...item335a8ff1a7

[agr071]

Have been thinking about it, but i don't know if the curved parts join up, or if you have to add extra tape to them to make them fit.

[RodneyHZ253]

Have been thinking about it, but i don't know if the curved parts join up, or if you have to add extra tape to them to make them fit.

I messaged the guy as we want 4 sets, 2 for us and 2 for a mate who is restoring Toranas and is also doing the panel work to the yellow van..he said he would do 4 for $100...might give em a go..if they dont work I will let him know.....:angry:

[agr071]

That's good value.
You can't go wrong with that. :D