looks like i filled up that post with pics so i have had to move along....
where we are at with the van is....
it is legally registered in nsw as a wb van with a 350 in it...how i achieved this from a utility was to do a blue slip for a body variation and a wieght variation hence i did not have to put it thru new registration as the chassis between ute and panelvan is the same...
we have just changed the diff from 3.55 to 3.08 ratio and i have just cut the nose to give it that squared off look like the premier/statesman nose cones...
my next step with the van is to replace the upper and lower control arms with some from a wb statesman i just purchased to wreck that has brand new bushes and ball joints that have never been down the road..
at the same time i will be replacing the stub axles with stubtech 2 inch drop stubs which i just purchased...
i like my vans low and i decided this time i would like some suspension unlike the last van i had..
received my drop stubs today,nice lookin and they should be for the bucks...
Reply With Quote
Bookmarks