Another Adjusting Problem on my WB!!!

[83 WB_Ute]

the correct throwout bearing has a plastic carrier with a non replacable bearing.pull type clutch only.LATE HZ WB ONLY..6 AND 8 ARE DIFFERENT SIZE CARRIERS TO ANYONE ELSE READING THIS...if it has a metal carrier and replacable bearing its for the push type clutch in hq to early hz...very common problem that the incorrect bearing and carrier are supplied with replacement clutch kits these days....this may be the reason there is a hose clamp in there....

I will have to check and see which one it has.. I'll pull the cover off and try and get a picture of it..

[buck]

its very cold on the garage floor at the moment, i hope these picks help, just remember it a v8 4speed with clutch fork cover removed, please excuse the mess, that is from the old engine 25 years of mud cow shit and oil, just have not got around to cleaning yet. the oil on the cable is chain oil, you must lubricate the cable inside so it doesnt snap after a couple of years
2012-07-06 14.08.44.jpg2012-07-06 14.09.10.jpg2012-07-06 14.09.51.jpg