ok guys a few more pics from a few months ago back where i started

the nasty nasty roof , the rest of the gutters wernt too bad just needed a good wire wheel etc,i had to get the back gutter made up lucky i got a mate at the metal place(dont look to closely at my welding)

315.jpg
329.jpg
pano 003.jpg

next i found this under about an inch of bog and i goota tell you it was a bit dis heartening at this stage , note how rooted the inner of sill on this side is . i dont have the inbetween pic but i had to weld a piece on the whole corner with the curve etc

003.jpg
poo 003.jpg

had to get a piece folded up for inner sill the whole way along

008.jpg

the other side only needed this much , i dont know why one side was so much worse maybee parked that side on grass for a few years. but i tell ya if your sill panel only has a little rust at the back and front do the whole thing any way as it had nearly eaten through from the inside

panelvan 1 005.jpg
panelvan 1 006.jpg

the back needed inners to , a fair bit of work and didnt get half the pics , a lot of sealer and stone guard in order

panelvan 1 007.jpg
panelvan 1 015.jpg
019.jpg

where im up to now all inside edges painted now onto doors

panelvan 1 003.jpg

cheers
ben