Quote Originally Posted by Taily View Post
Still doing drawings and a lot of holding front aprons up in position etc at the moment looking at how much of the door sheet metal I'll need to use to graft it all together. Don't think it will be anywhere near as flash as your one with the sectioned roof/pillars though! Thought I'd keep the standard length tub and stand the front wall upright and put a toolbox in front of that, using a small section of bonnet (around 6 inches) out to the apron, which (in the latest idea I have) will have the lights removed, plated then lights painted in place so as to avoid silly questions from the Plod etc....

Small other problem is too many other little jobs on the go at the moment too....

Regards,

Dave.
`

Hey Dave..great to see another trailer in the works!!

I also thought of using the front apron too...but i think i'm too anal about the front panel lining up with the rear quarters....so im going to give that idea a miss. Instead i'll likely make up some wheel wells and mount the spare wheels vertically in that...but still using a 10inch front section of a roof and sheet along the roof line...if that makes sense!!! I have a cool triangular Kinchrome toolbox i'll mount on the drawbar....which i scored for virtually a large big mac meal!!!

It would be really cool if you started a thread of your build, you'll be surprised how the other forumites get you to think outside the box with clever ideas!!!