Tailshaft and Yoke

[Taily]

It'll only go together one way mate. The bigger end is the yoke. Just make sure the circlips are in tight against the inside faces of the yoke and shaft.

Regards,
Dave

[ozbox]

It'll only go together one way mate. The bigger end is the yoke. Just make sure the circlips are in tight against the inside faces of the yoke and shaft.

Regards,
Dave

dave ive seen them put on back to front many times..unis are the same at each end unless its a t400 shaft ..so they can be back to front..

hahahaha..just saw your other post...sorry...but answer is large end of tailshaft to gearbox and narrow end to diff..

--- Updated ---

Can anyone tell me the correct end the yoke goes back on the tailshaft , is it the narrow or bigger end, a friend put some new uni s on for me and put the yoke on the big end but I think it may have gone the other way around??

he has done it the right way.