Mrs Mook's HZ Prem

[Innuendo]

Now here is a tricky problem....
Ambientgoat and I got the prem up and running last night after discovering that the hose from the pickup to the hard line had perished. This was replaced and then the engine could get fule and be started. The car has been sitting 24 hours and now it won't start? We did change the file pump to one without the glass float. I'm sure that the Origenal one was fine but just couldn't suck the fuel through because of the crusty hose.

There is every chance you have installed the fuel pump cam lever on the underside, meaning the pump isn't pumping. Remove the fuel line from the carby and crank it over and see if any petrol is pumping up the line. If you have had the needle out of the carby make sure it have been re-installed the right way around.

Regards, Smooth

[mook]

There is every chance you have installed the fuel pump cam lever on the underside, meaning the pump isn't pumping. Remove the fuel line from the carby and crank it over and see if any petrol is pumping up the line. If you have had the needle out of the carby make sure it have been re-installed the right way around.

Regards, Smooth

I had it running for ages last night, plus I gave it some decent revs, enough for the missus to complain. So it must be sparking and pumping...