Reproduction Sandman Full Length Hoodlining Bows and Rear Retaining Strip.

**stickthis** · 23-06-2010, 06:41 PM

Gday Geln I will get back to you with cost ASAP. I can do you the bows seperate if needed.

Cheers
Jason

**hux454** · 23-06-2010, 07:40 PM

Thanks Mate, (does that include Forum discount, lol).

**GTS** · 23-06-2010, 07:46 PM

Does anyone have a parts catalogue pic of the bits required to fit the full length hoodlining? I have the bows and rear?? "wire"....but thats it. Is there anything else.

**stickthis** · 23-06-2010, 07:55 PM

Yes mate there is more.

There it two bows.
two wires.
2 side pannels for the trim to fit against and the wires to go into.
Plugs for bows (which I will include in my kits)
Rear retaining strip.

**GTS** · 23-06-2010, 08:20 PM

Starting from the front I've got a bow which would be above the seats, a wire just behind the interior light, another bow, another wire, another bow then,.....well..... nothing. How does it attach to the rear hoodlining panel with the "teeth"?:errf:
It has the strips down either side from the rear attaching panel to the front doors.

**Absinth** · 23-06-2010, 08:44 PM

Originally Posted by GTS

How does it attach to the rear hoodlining panel with the "teeth"?:errf:

The headlining is just pushed up between the rear panel and the toothed strip, the teeth bite through the lining and hold it in place. I use a painters wide blade putty knofe to push it up with.

**hxbunny** · 11-07-2010, 07:13 PM

G'day Jason,

I would be interested in the bows etc as well, i have a shell that has the rear mounting "teeth" and side strips (and a bit of surface rust) but that is all.

Cheers Mark

**razsandman** · 12-07-2010, 09:27 PM

got a final prise yet?? i would be keen for a set. cheers

**stickthis** · 12-07-2010, 11:56 PM

Just waiting on the rear strip to come in. Everything else is ready to do. I will work out some prices later on tonight maybe early tomorrow.

Cheers
Jason

**stickthis** · 13-07-2010, 01:13 AM

Ok.
Here are some prices for those interested.

Complete kit:
2 x large bows. Bent up as originals. Made from spring steel to keep them nice and stiff.
2 x smaller bows. Bent up as originals. Made from spring steel to keep them nice and stiff.
Enough screws to fix the small bows including pics of locations etc.
4 x plastic plugs to go in the side pannel holes to hold the bows
2 x Side pannels cut to size and pre drilled for the bow holes. These are to be welded to side of the van. Will come with photos of originals to help position.
1 x Rear strip lazer cut same shape as the originals. Bent up as per originals also. This is to be welded or screwed to the rear.
1 x CD full of pictures to help you get everything right.
$250 + freight. $230 + freight for mySandman.com.au Members.

Bows on their own. (this is ok if you have an original sandman and all the side pannels and rear strip are still attatched.
2 x large bows. Bent up as originals. Made from spring steel to keep them nice and stiff.
2 x smaller bows. Bent up as originals. Made from spring steel to keep them nice and stiff.
Enough screws to fix the small bows including pics of locations etc.
4 x plastic plugs to go in the side pannel holes to hold the bows.
$150. + freight $140 + freight for mySandman.com.au Members.

Anyone that is interested please contact me here. Or email at jason@stickthisdecals.com.au or pick up the phone 0427110502. (I will ring back if I dont answer as im a busy man ;))

We are also looking at doing the hoodlinings to go with them.

Cheers
Jason