Reproduction Sandman Full Length Hoodlining Bows and Rear Retaining Strip.

**razsandman** · 12-07-2010, 09:27 PM

got a final prise yet?? i would be keen for a set. cheers

**stickthis** · 12-07-2010, 11:56 PM

Just waiting on the rear strip to come in. Everything else is ready to do. I will work out some prices later on tonight maybe early tomorrow.

Cheers
Jason

**stickthis** · 13-07-2010, 01:13 AM

Ok.
Here are some prices for those interested.

Complete kit:
2 x large bows. Bent up as originals. Made from spring steel to keep them nice and stiff.
2 x smaller bows. Bent up as originals. Made from spring steel to keep them nice and stiff.
Enough screws to fix the small bows including pics of locations etc.
4 x plastic plugs to go in the side pannel holes to hold the bows
2 x Side pannels cut to size and pre drilled for the bow holes. These are to be welded to side of the van. Will come with photos of originals to help position.
1 x Rear strip lazer cut same shape as the originals. Bent up as per originals also. This is to be welded or screwed to the rear.
1 x CD full of pictures to help you get everything right.
$250 + freight. $230 + freight for mySandman.com.au Members.

Bows on their own. (this is ok if you have an original sandman and all the side pannels and rear strip are still attatched.
2 x large bows. Bent up as originals. Made from spring steel to keep them nice and stiff.
2 x smaller bows. Bent up as originals. Made from spring steel to keep them nice and stiff.
Enough screws to fix the small bows including pics of locations etc.
4 x plastic plugs to go in the side pannel holes to hold the bows.
$150. + freight $140 + freight for mySandman.com.au Members.

Anyone that is interested please contact me here. Or email at jason@stickthisdecals.com.au or pick up the phone 0427110502. (I will ring back if I dont answer as im a busy man ;))

We are also looking at doing the hoodlinings to go with them.

Cheers
Jason