Attaching Clutch Fan

**HK1837** · 22-03-2013, 05:29 PM

Here is a picture of the pulley on my Prem. I'll measure it when I get it off the hoist. Looks like A/C cars have the square edge pulley and non A/C have the rounder one. This would appear to apply for long and short water pumps. Once I measure the diameter of the pully groove my bet is the A/C one is a different diameter to the non A/C one.

Fan pully.jpg

**Blocker** · 22-03-2013, 06:03 PM

Thanks mate.

While you are in the mood for posting pulley pics, could you please take one showing the clearance of the fan to bottom pulley... or measure

I'll guess the outer diameter at 40mm.

Cheers.

**ambientgoat** · 22-03-2013, 06:09 PM

I think this means I get a coke for getting it right!

**Innuendo** · 22-03-2013, 06:24 PM

Originally Posted by ambientgoat

I think this means I get a coke for getting it right!

You'll be sharing, I pointed out that there is two different types of water pump pulley's.

**HK1837** · 22-03-2013, 06:31 PM

I knew there was two, but I didn't realise there was actually 5! And why they are different.

Blocker, it will be 40mm, same as the rounded non-A/C ones. The one on my Prem will be the same as the one you got from the goat. It is the diameter of the pulley itself that intrigues me.