Grunt's Papaya HX Sandman 18v 308 4 speed Project

[Grunt]

so time to do a bit of preventative rust proofing before the interior goes back together



Seems a shame to drill holes in the sill but need to get the rust primer and cavity wax deep into all areas



The products I used


So I pumped all this stuff into the sills, the inside of the doors, the tail gates, bottom of the A pillars and inside the access panels in the back. Used the rust primer first and left it for 2 weeks to dry. All areas were then followed up with the cavity wax.





Found some plastic plugs like the factory ones to cover the holes. These will be covered later with the sill plates so they will be never seen