Grunt's Papaya HX Sandman 18v 308 4 speed Project

[Grunt]

The cabin area mostly done, visors and mirror back in.... still needs a clean!





The wire attached to the roof bar



This is the read Headling attaching point. As you can seem most of the little teethare at an angle where they will not grab the head lining . Out came the scribe and each tooth was bent out...... there are so many to bend



The back roughed in, clips holding it





All stretched and ready for glue



All glued up around the rear rails and door frame using an upholstery contact glue

I will be rinning some pinch weld arpound the read rails to finish it off when it arrives







Before the final clean







So there go, if you are going to try this yourself the main things to remember, dont rush, it took me 1.5 days or so to do this and make sure you find the true centre or it just wont work