Blocker's Sandman

[HK1837]

I'd be sitting it on a level floor once it is etched and doing all the measurements before you paint it. I'll send you the drawings with all the measurements on it.

Also look hard for cracks around the shock tower and around the lower control arm mounts especially the back ones

[Blocker]

I'm wondering if it has already been on a rack and that a gentle belt was needed (hence the ends of the chassis)?

Might be straight enough already?

Possible but not 100%. It may have been just a knock that caused the bends and it'll need to be put back into shape.

I'd be sitting it on a level floor once it is etched and doing all the measurements before you paint it. I'll send you the drawings with all the measurements on it.

Also look hard for cracks around the shock tower and around the lower control arm mounts especially the back ones

The measurements would be handy mate.
Currently welding on the spare wheel winch T bar which was removed, also welding kidney bean plates to the lower control arms to provide support. All will be revealed when it returns from the blaster.

[sandasharpe]

Hi HK1837, Have you got some pics of these bars?