GTS Wheels on ebay

[agr071]

Sorry Jennie, It's the one you are dealing with.

[ozbox]

The rims are the same from HQ through to HZ but they are date stamped if you really want to get anal and made by different manufacturers. HQ had the rounded trim rings, not positive on HJ but HX and HZ had the squared trim rings.

Your original trim rings should be able to be re-chromed as long as the rust is only surface. Will have to check the ones I have as I seem to recall them being stainless steel like the HG GTS hubcaps..... :confused:

the rims are not the same from hq thru to hz....hq up to end of 73 was a canadian manufactured rim specifically taken from pontiacs...the centre star piece is more defined on its edges and you have stamping next to the valves on the outer edge...
74 on they are made by roh in australia and the stampings and date codes are under the tyre..the star section is less defined on its edges...
trim rings for hq are square edged...none are rounded edges...trim rings were also an accessory and not factory fitted equipment..

[Absinth]

trim rings for hq are square edged...none are rounded edges...trim rings were also an accessory and not factory fitted equipment..

Touche Greg.... (that's my old man moment for the week) :o The rounded trim rings are aftermarket accessories..... however... I am led to believe the squared off trim rings... Holden part No. 2823098 were a factory fitted optional extra on Rally type and steel 6.00x14 wheels the same as the radio, front and rear spoilers etc. if initially ordered with these options... or ... were all Holden accessories dealer fitted once the vehicle was delivered to the Dealership.

[QUOTE=ozbox;4504]the rims are not the same from hq thru to hz....hq up to end of 73 was a canadian manufactured rim specifically taken from pontiacs...the centre star piece is more defined on its edges and you have stamping next to the valves on the outer edge...
74 on they are made by roh in australia and the stampings and date codes are under the tyre..the star section is less defined on its edges...QUOTE]

As I stated.... they are date stamped and made by different manufacturers (therefor minor manufacturing differences) but essentially they are the same Rally II type rim on HQ through to HZ. Again if you want to get more anal HZ Rally II rims were colour coded on GTS.

I also just checked my parts manuals and there are actually three different part numbers for Rally II rims....
HQ...... part No. 492351
HJ....... part No. 9930999
HX-HZ..part No. 9942307

HZ also lists Wheel asm - 6.00x14.....GTS....part No. 9947521 which I take to be the colour coding of the Rally rim however it is not listed as a Rally type.

[ozbox]

yes but we need to get anal in some areas......why spend 30 to 40 k to do a correct resto and have some prick like me come up and start picking your van to peices at a sandman show..the canadian rims finish before the hq sandman so they are really not in a sandman resto...canadian rims stand out like dogs balls with no trim ring because of the date coding next to the valve...

[Absinth]

Nothing a bit of bog won't fix......

[ozbox]

Nothing a bit of bog won't fix......

and then ya better bog those edges of the spokes....

[Absinth]

and then ya better bog those edges of the spokes....

Come on...... 4" grinder with a sanding disc works better.......

[ozbox]

Come on...... 4" grinder with a sanding disc works better.......

ok....good call..:errf:

[jennie285]

Well we didn't win them as I was away for the day, sudden decision to go to Temora to watch No 1 son play rugby.....so forgot all about telling the family to bid for me oh well win some loose some...