Engine.

400sbc
Dart lilM block, billet steel 4 bolt mains.
4340 crank, 6" H beam rods, SRP forged pistons, 11.7-1CR
Hydralic roller cam, moly pushrods, 1.6 roller rockers, titanium retainers,
AFR heads, ported,
VicJnr manifold, 950 HP Holley
Jet Hot coated 1 3/4" extractors.
Crank trigger with MSD Programable Digital 7 ignition.

I was originally building this engine for the panelvan(in the other post), but when I put the blown engine in the panelvan, I decided this one would be good for the ute.
I was aiming for 600+HP for the panelvan, but have tamed things down a little, smaller cam and intake. It should still go around 550HP and be reasonably streetable.


This pic is pretty much whats going into my ute. I built this one for my brothers ute. All the same specs as mine, except smaller cam and less CR. It's in a WB ute and goes like a missile.



Or should I use this one????



Nah, just kidding. This ones a spare, and for sale if anyones interested. 468BBC, with best of everything. Was building for SCO rail, but not going to use it now.