its a celica box what sort of horse power will these handle would it be ok for 350 to 400
its a celica box what sort of horse power will these handle would it be ok for 350 to 400
HZ Jasmine Yellow Windowless Sandman, now being driven everywhere and is finished!
HZ Madeira Red Windowless sandman now Sold to Bigrob
HX Mandarin Red Sandman Ute finished, and club registered
1979 HZ malachite windowless van with 308 5spd, all chromed up and shiny finished and named "The Player"
Married to RodneyHZ253
If driven sensibly they will be fine behind a 253 or 308. Just like an aussie 4spd, easily broken but will last if not abused.Originally Posted by jennie285
To use the box behind a V8 you'll need a bellhouing, clutch plate and might need a tailshaft mod, the one in this ute may have the Celica yoke with Holden uni on it but is possibly a 6cyl one. Crossmember will need modifying too as relative to the 6cyl location the box will move forward by the difference in length between a 6cyl and V8 aussie 4spd. I have a 253/308 to Celica bellhousing and clutch setup at home, but it has longer bottom bolts being a Dellow one so only really useful for HT-HJ as if you try to use it on HX or early HZ you have to wreck the rat-trap as it attaches using the lower bellhousing bolts.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Bookmarks