Mook's HQ daily

[mook]

image.jpg

Ok here we go...

I just recently picked up this HQ, i was told it had a 253 but it turned out its a 308, so that's a bonus.

I'm going to patch it up to a point where it can be safely driven and use it as my daily.

This will involve rust repairs to the plenum, floor and parcel shelf.

I also plan to remove the gas system as it is out of date and will help eliminate any future problems that I won't be able to solve.

I have recently purchased a mig welder and will be tackling the repairs myself.

Each night I'll be chipping into it so hopefully regular updates.

Advice will be much appreciated!

[HK1837]

Can you send me the ID details for the database? Plus the firewall number if it is a Pagewood example or cowl number if early Elizabeth?

[mook]

Firewall number? Where would one find that? It's a mess of paint and wires ATM. Pm me your email hk

[Alien DNA]

Possible EweT mockup Mook?

Grats on the purchase

[damienengland]

Hey Mook. Only advice from me is re the Mig. I had to convert mine to a gas setup and drop to 0.6mm wire when i had a go. I also found i was too fast a lot of the time and poured too much heat into the steel. I ended up sacrificing an old door to practice on until i had the technique sorted.

[mook]

Hey Mook. Only advice from me is re the Mig. I had to convert mine to a gas setup and drop to 0.6mm wire when i had a go. I also found i was too fast a lot of the time and poured too much heat into the steel. I ended up sacrificing an old door to practice on until i had the technique sorted.

Cheers Damian. I've just got a role of 0.6 and a bottle of argoshild so we should be in business!

- - - Updated - - -

yeah slow and steady. watch vids on youtube. its so easy to warp the shit out of a panel with all the heat they pump out

Will do! Ahhhh the internet.

[Vombil]

yeah slow and steady. watch vids on youtube. its so easy to warp the shit out of a panel with all the heat they pump out

[mook]

To be expected after the windscreen removed...

Gas system almost out, trying to identify this holly carb so I can try to get a rebuild kit.

[Robbo]

Good on you mook, enjoy your project.

[Innuendo]

Gas system almost out, trying to identify this holly carb so I can try to get a rebuild kit.

Looks like the typical #1850-1 600cfm Vacuum Secondary Holley.
You will find the part number on the front of the choke tower. It will read "List XXXX-X"

That glued on thing is obscuring it somewhat!