Hey HXsman, well that bit me on the arse didn't it! Dobbed you in to update your build thread without realising that i didn't have any good progress to share...so now i'm scratching...

Ok, where do i start? So it looks like its been about 8 months since the last updates here. Work has been crazy busy...and well i guess that's a common story for many. So i jumped out into the shed and had a look today for what's happened since the last update here. Probably of note, i got a few fabricating items completed, along with most of my engine wiring installed and decided along the way to move the wiper motor behind the plenum and also move the power steer and A/C compressor off the engine (yep, going electric with these items) ...and convert my heater core to electric so i could get rid of those pesky water hoses. End result should be a super clean engine bay.

Shall we check out some pics?

Yep still here...with a new family member...might cause some controversy on this site!
20200301_122714.jpg


Fuel fill pipe made and fitted
20200301_183720.jpg


Designed a throttle cable bracket
20191201_152340.jpg

20191201_145942.jpg


Had a good mate come around, re-sanded the inside and etch primed it again
20200126_134254.jpg


Finished 98% of the engine wiring. Its all here in these pics.
20200301_175905.jpg

20200301_175915.jpg

20200301_175940.jpg

20200301_180000.jpg


Moved the wiper motor behind the plenum. Its a VT unit and i made up custom aluminium tube rods with rod ends.

20200301_174749.jpg

20200301_174811.jpg

20200301_175224.jpg

And a video if i can get this to work...
https://photos.app.goo.gl/RmGpP5wfcHxYrde48