So another Saturday working on the van...and I've come across an issue which has set things back slightly. The MRA assembly in the fuel tank has unfortunately fouled on a floor rib and cracked, so it had to come out to get the assembly moved.

But in better news, i got the front drivers seat mounted in (from a WN Caprice V) with some custom offset templates to fit the seat runners to the existing floor holes. Pics below...

Damaged MRA assembly...Bummer, didn't see this happen...but happy it got spotted in time.
PXL_20230729_012522642.jpg

Gonna move the assembly forward on the tank.
PXL_20230729_023032539.jpg

This is my plan for the seat mounts. First I lopped off a couple of Commodore fixings from the runner base.
PXL_20230805_031450805.jpg

Then make a couple of flat bar pieces with offset bolt holes.
PXL_20230805_040531458.jpg

The seat bolted in nicely and fits well. Not sitting too high and lines up nice and central with the steering column.
PXL_20230805_044911041.jpg