Saginaw 4speed shifter??

[RAEME]

I had a look this arv. Lifted and pushed, stuffed if I know still can't seem to get reverse. Also HK the gear stick mount has no brand markings on it but on the left hand side is US pat numbers. Not sure who made the mount tho. Cheers.

[panoz78]

If the gates on the shifter are not aligned properly you will not get reverse .
To aline up use a tight fitting Allan key and put in the hole with the linkages of the box.
Then put the arm on the box with out force them on .
Spin the arm to the linkage to adjust
Once all 3 are done remove the Allan key
To get reverse you just push hard to the left then forward
If then it doesn't go in spin one of the gearbox shafts a bit to line up the gears inside
image.jpg

[RAEME]

If the gates on the shifter are not aligned properly you will not get reverse .
To aline up use a tight fitting Allan key and put in the hole with the linkages of the box.
Then put the arm on the box with out force them on .
Spin the arm to the linkage to adjust
Once all 3 are done remove the Allan key
To get reverse you just push hard to the left then forward
If then it doesn't go in spin one of the gearbox shafts a bit to line up the gears inside
image.jpg

Thanks mate. I'll have a go and let you know. Cheers