lower control arms ??

[r0bb0]

hey guys started to pull the front suspension off the hq van to get ready for sandblasting ( massive progress on the resto) and noticed that the lhs lower control arm has been chopped out by the sway bar link. just waned to know if there is any difference in v8 ones and the 6 bangers
cheers r0bb0

[HZSM50]

I didn't think HQ's had sway bars.

[Dr Terry]

I didn't think HQ's had sway bars.

The only full-sized Holdens not factory fitted with front sway bars were the FX & FJ series. All Holdens FE onwards (except pre-77 Toranas) had them.


Dr Terry

[Vombil]

had a google search. looks like they do

don't think there is any difference

[Big Rob]

No, they are all the same. Just the springs are different.

[r0bb0]

Thanks guys

[HK1837]

HQ and HJ are different to later ones, but only in the shock mounting area. Later ones are cut out more for bigger shocks. If you are doing an anal resto you want early ones but otherwise it doesn't matter.

[Vombil]

HQ and HJ are different to later ones, but only in the shock mounting area. Later ones are cut out more for bigger shocks. If you are doing an anal resto you want early ones but otherwise it doesn't matter.

Does this mean they still mount the same ie you could use a later one in HJ without replacing upper and any other related parts?

[HK1837]

Yes. Only things changed were the enlargement of the shocky holes, and the bushes for RTS. From memory uppers wer ethe same too, the RTS geometry was achieved in the chassis unlike UC where it was in the control arm itslef.