Hi James
The reason I was enquireing here is that I know all the
listings for this sender are wrong .
The 360.005 is listed as a 10-180ohm which when fitted to the Hz the gauge will run backwards.
The Hz gauge reads higher as it gets more of a signal from ground ,which means fitting the360.005
the gauge will read lower as the pressure goes up.
I think Vdo have listed it wrong somewhere many moons ago that is why I was asking here
Thinking that someone else has had the same problem .I have even searched all the threads here & many others.
They all go back to the Vdo data.....
http://www.vdo-gauges.com/pressure-s...nptf-29-8.html
The Hz/GTS sender needs to be around 240-33ohm but is only available in the 1/8npt thread using an adapter is not a problem .
http://www.vdo-gauges.com/pressure-s...pt-240-33.html
But I have a sender that is 240-10 with a 1/4 thread..