going to have a look at a wb ute sunday would a hx z front bolt straight on with no dramas good straight bodys hard to find cheers
going to have a look at a wb ute sunday would a hx z front bolt straight on with no dramas good straight bodys hard to find cheers
It will bolt straight on. The radiator is different though. Wiring harness for headlights is different.
Once upon a time everyone pulled earlier fronts off to put a WB one on.
The whole front will (nose, support and guards) but only 2 of 3 bar bolts on each side line up (not good in a crash). You can leave the WB inner guards so you can use the WB canister and overflow bottle, just be careful of metric threads.
If you plan on running HQ to HZ tail-lights you are probably better off using the whole HZ cabin, body and lighting harnesses plus column (so reverse lights work right and you don't have to modify the headlight harness). In this case it won't comply with ADR's either unless you weld in the quarter panel lights.
thank you this wb is a 308 4speed just don't like the fronts on them want to do a super mint with honey combs and stripes should look good
If its a factory v8 Kingswood I wouldn't pull it apart.
Super mint - great colourOriginally Posted by rocky
Id be using a WB stato front on it with super mint that would look cool
sound advice. these are next in line for a value run i think
BQZ
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks