Tailshaft

[HK1837]

Yes if it is an original HZ/HZ/VB/VC TH350.

[mauser]

Yes if it is an original HZ/HZ/VB/VC TH350.

Cool that will make life easier. It looks like the white coated one Scott had documented for the HQ SS so I'm hopeful its the original. I think the cross-member is the same as well.

Ill put everything else for the T350 on a pallet and find someone who wants it.

I still have to workout how the rat-trap goes in. I supposedly have one from a HQ V8 here in a box.

Mauser

[HK1837]

Cool that will make life easier. It looks like the white coated one Scott had documented for the HQ SS so I'm hopeful its the original. I think the cross-member is the same as well.

Ill put everything else for the T350 on a pallet and find someone who wants it.

I still have to workout how the rat-trap goes in. I supposedly have one from a HQ V8 here in a box.

Mauser

HQ van won't be the same as HQ SS, it will be longer. HQ SS shaft is just a normal white HQ-HZ V8 sedan or coupe tailshaft for any gearbox except TH400.

Crossmember for TH350 is different to trimatic/3spd/4spd, and also different to a passenger vehicle one.

- - - Updated - - -

image.jpg
Just going from this information. It says two. Long wheelbase and short.

They've not published it for the L31 tonner as it wasn't available in that form until after initial HJ release.

[Shadizarvan]

Anyone have the length of tailshaft for a T400 to Salisbury in a HJ Van (weld to weld or eye to eye). Should be same as Statesman with T400.
Cheers