what headers fit

[mook]

The pacemakers I have in my van 308/turbo400 are tight to fit, but fit well if that makes sence. Very well made btw.

[Innuendo]

If your looking for a lesser known brand.
These MPH brand from Wollongong aren't too bad.
http://www.ebay.com.au/itm/HOLDEN-HQ...-/271743058588

[jason.ruff]

Big problem is a lot of these sellers do not post to overseas. You would have to contact them to see if they will.

[Big Rob]

The pacemakers I have in my van 308/turbo400 are tight to fit, but fit well if that makes sense. Very well made btw.

Yep, make sure you get ones that will clear a turbo 400 if that's the way you are going (although I seem to remember in another thread you were discussing manual boxes).
4 into one headers can be close to the transmission pan and overheat the fluid on T400's.
Most headers will fit past a manual box with plenty of room.

[don3527]

I'm sticking with a manual tranny so I don't think I'll have a problem there. Running a Tremec transmission. I fired an e-mail off to pacemaker to confirm fit but I haven't heard back from them yet.

[mook]

Yep, make sure you get ones that will clear a turbo 400 if that's the way you are going (although I seem to remember in another thread you were discussing manual boxes).
4 into one headers can be close to the transmission pan and overheat the fluid on T400's.
Most headers will fit past a manual box with plenty of room.

Ceramic coating that they offer makes a huge difference to pipe temp. Here's hopeing anyway!

[adam perth]

Don, try and stick with the 153 tooth flywheel as the 168 tooth with its big bulky starter may give you problems also

[april_eighteen]

Hookers are nice.