Glove box locks

**ozbox** · 07-04-2011, 10:45 AM

goin by that picture it has the thick spoke wheel.5 mil..which is not right for an hz..that cap matches that wheel and both are right for hj and some hx as per another topic on gts wheels which is here somewhere..

--- Updated ---

http://www.mysandman.com.au/forums/s...teering+wheels

this thread will answer your questions...

**HZSandman** · 07-04-2011, 11:23 AM

hjSandman has an early HZ GTS which is completely original and it has a 5mm steering wheel in it. May have been left over stock that was used up before changing to the new 3mm thick spoke wheels.

**ozbox** · 07-04-2011, 04:10 PM

Originally Posted by HZSandman

hjSandman has an early HZ GTS which is completely original and it has a 5mm steering wheel in it. May have been left over stock that was used up before changing to the new 3mm thick spoke wheels.

go read that thread from start to finish and then come back and tell me its original?

**HZSandman** · 07-04-2011, 07:49 PM

Read whole thread.

what are you saying Oz?

**ozbox** · 07-04-2011, 10:21 PM

im saying that no one can possibly say something is original..simple as that..too many variations to argue an originality factor..

**hzsman77** · 10-04-2011, 01:01 AM

Originally Posted by ozbox

goin by that picture it has the thick spoke wheel.5 mil..which is not right for an hz..that cap matches that wheel and both are right for hj and some hx as per another topic on gts wheels which is here somewhere..

--- Updated ---

http://www.mysandman.com.au/forums/s...teering+wheels

this thread will answer your questions...

Thanks for your help. Just to confirm before i pull my car apart again. My 11/77 HZ has a 3mm gts steering wheel with a HX horn button, chrome glove box lock, chrome single prong ignition barrel.