Turbo 400 leak

**HK1837** · 18-03-2015, 04:22 PM

Originally Posted by RAEME

Hmm interesting, so what options would you guys have with the hoses etc on my cooler? At the moment it's mounted at the RH front of the radiator nearly sitting on the splash panel. It's connected with two rubber hoses straight into the steel fittings in the box. Thanks for taking the time to help also, it's appreciated. Cheers

Nothing. Fix the seals on the selector and speedo drive and it should be fine.

**Big Rob** · 19-03-2015, 02:54 AM

Originally Posted by HK1837

Nothing. Fix the seals on the selector and speedo drive and it should be fine.

Yeah, I have a feeling you are right. If the dipstick tube, selector seal and speedo drive don't leak, and the pan gasket is intact and torqued right, then it doesn't matter if the level in the trans is high when parked.

I put a loop in the rubber hoses and cable-tied them up a bit higher than the cooler and this helped a lot. It seems to stop (or slow) the drain back to the trans from the cooler. I suppose you could find a low location for the cooler, but the radiator is a good spot in the airflow.