Results 1 to 7 of 7

Thread: Body removal

  1. #1
    P Plater matt.p's Avatar
    Join Date
    Sep 2013
    Location
    Wollongong NSW
    Posts
    90

    Body removal

    Hi guys
    I have hit a little bit of a hurdle removing the body from my chassis. I have a problem with the front outter bolts. I had cleaned up all the dirt and soaked the tops of the bolts with rust off however when loosening these bolts in particular i have torn the locating tabs and the threaded plate now rotates hence i cannot undo the bolts.
    I have tried holding the plate with multi grips and it does stop it from rotating but the bolts seem to be seized.
    Any ideas please

  2. #2
    Night Rider Valencia's Avatar
    Join Date
    Jul 2011
    Location
    Perth
    Posts
    4,092
    Bit if heat maybe

    - - - Updated - - -

    of ..

  3. #3
    Sandman Driver damienengland's Avatar
    Join Date
    Oct 2012
    Location
    Chelsea, Victoria
    Posts
    772
    Try cutting straight through the rubber mount and bolt with a recip saw or grinder. This would enable separation of the chassis from body which will then enable the remaining bolt sections to be removed easier.

  4. #4
    Decal Demon stickthis's Avatar
    Join Date
    Feb 2010
    Location
    SA
    Posts
    1,957
    Can you get in there to cut the bolt heads?
    Owner (Jason) - STICKTHIS Automotive Decals and Stripes

    HX Sandman Panelvan. Mint Julep. Complete Factory Resto.
    HZ Sandman Ute. Saddle Tan Metallic - Customised. Galaxy Blue.
    HZ GTS. Palais White. Next Resto From 99% NOS Parts.
    HSV GTO Coupe - Highly Modified
    VR SS into a VS Supercar Castrol Perkins Ingall 1997 Tribuilte build

  5. #5
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    Can you get a angle grinder or die grinder in and cut the head off the bolt? Tack weld the plate back on? Can you put a picture up??

  6. #6
    Decal Demon stickthis's Avatar
    Join Date
    Feb 2010
    Location
    SA
    Posts
    1,957
    Damien's idea would defiantly work. separate it then worry about it later. New bolts should be available from Rares. I sent them samples a few years back from memory.
    Owner (Jason) - STICKTHIS Automotive Decals and Stripes

    HX Sandman Panelvan. Mint Julep. Complete Factory Resto.
    HZ Sandman Ute. Saddle Tan Metallic - Customised. Galaxy Blue.
    HZ GTS. Palais White. Next Resto From 99% NOS Parts.
    HSV GTO Coupe - Highly Modified
    VR SS into a VS Supercar Castrol Perkins Ingall 1997 Tribuilte build

  7. #7
    P Plater matt.p's Avatar
    Join Date
    Sep 2013
    Location
    Wollongong NSW
    Posts
    90
    I tried to get a grinder in there but the little 4 inch doesnt quite reach. I have cut the rubber away and i think i will try and use the dye grinder. Something that i didnt even think of. Thanks guys

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •