Door Seals

[rallyvan]

I am ready to fit the door seals to the van but struggling to find out how the seals are positioned. Is the tip or point of seal is offset to one side. Does the tip go on the outside (against the door frame) or does it go on the inside (closest to the door jam)?
Seal 1.JPGSeal 21.JPG

[XX7SANDMN]

flat section against the door frame and tip facing the door jam and start with the 2 plastic pins that are closer together on the door on the lock catch side after fitting the door wont close nicely for a while till the seal flattens out

[Gm nut]

Hi guys are there any different brands of these?
If so which are softer?

[maxsandman]

From personal experience, Better auto rubber (queensland, maybe gold goast?) is good to use,... Rare spares rubbers are very solid, & hard to shut doors or line the doors gaps

cheers
Max

[sandman 78]

l bought a full kit from better auto rubbers everything oka except the doors couldnt get get the door shut properly spent alot of waisted time so l used the old genuine rubbers that are in reallly good nick. hope you sought out your problem rallyvan

[gregbark]

For fitment of door seals you can view "Shed Talk" on the Rare Spares web site. http://www.rarespares.net.au/shedtal...id=EGKUWkViztw This should make your fitment easier.It explains which way to fit them for most Holden cars.